Specifications for Hollow Metal Doors 161 6 Panel

Doormart USA has a full range of hollow metal doors. Standard doors are 1 3/4" in thickness and are available in 16, 18 and 20 gauge. Door skins are mechanically interlocked vertically along the hinge and lock edge. Door edges are beveled 1/8" in 2" and door surfaces are flush and free of any joints welds or seams. All standard doors are manufactured from galvannealed steel and are prepared and reinforced to receive specified architectural hardware in accordance to ANSI A115 Standards.

1) Top Channel

18 gauge inverted end channel is spot welded to door skins and tack welded at each corner of the door for extra rigidity.

2) Door Closer Reinforcement

18 gauge door closer reinforcement box is laminated to inside of door skins.

3) Bottom Channel

18 gauge inverted end channel is spot welded at each corner of the door for extra rigidity.

161 CYLINDRICAL LOCK

Government Series 161 Cylindrical Lockset door prep is equipped with 18 gauge reinforcement and an added barrel support spot welded to the edge of the door in accordance to ANSI A115.2 requirements.

HINGE REINFORCEMENT

10 gauge high frequency hinge reinforcement with return bend for added strength.

 HONEYCOMB

Structural small cell 1" max kraft paper honeycomb.  Weight; 80 lb per ream min. density; 1.03 pcf min. sanded to required thickness
 

Doormart USA, All Rights Reserved
57 Box Street, Brooklyn, NY 99999
Phone: 1-877-561-3667, Fax: 718-383-1013
Terms of Use   Privacy Policy